Tublin® 35 2017-07-10T08:27:35+00:00

Tublin® 35 


It has improved seal abilities and easy opening, as well as closed against bacteria.
A product packed in TUBLIN® 35 will dry quicker than without any packaging.


Lay flat size: 50-400 mm – tolerance ±1 mm
Wall thickness: 40-80µ – tolerance ±10%
Temperature: -40°C up to 140°C
Property Typical Value Standard
Density 1.04 g/cm³ ISO R1183
Melting Point 170°C ASTM D 3418
Oxygen Transmission
Water Vapour 5000 g/50µ/m²/24h (38°C/50%RH) ASTM E 96 BW


 Sealing: Needs high sealing temperature.
 Filing: It is important to have contact betweem film and product.
 Storage  Dark, below 25 °C and 75% RH. Should be used within one year from date of production.


TUBLIN® 35 is not a packaging material. It is a process help which improves safety and yields.
Unwanted air pockets will be avoided, if the product is vacuumed in TUBLIN® 35. A product packed in TUBLIN® 35 will dry quicker than without any packaging.TUBLIN® 35 is closed against bacteria and mould.


TUBLIN® meets the requirements in EU regulation No. 10/2011/EC as amended by regulation No. 321/2011/EC, No. 1282/2011/EC and No. 1183/2012/EC on plastic material and articles intended to come into contact with food for the above mentioned test conditions.Global migration based on executed test made with:Method Nor. EN 1186-4:     Exposure to olive oil by pouccell. Gravimetric + GC/FID determination                                            Limit of detection: 2 mg/dm2Method Nor. EN 1186-5      Exposure to 10% ethanol by cell. Gravimetric determination                                            Limit of detection: 1 mg/dm2Specific migration based on executed test made with:Method Nor. EN 13130       Solvent dissolution and determination by GC/MSSML: Laurolactam               Limit of detection: 0.3 mg/kgIt can be used for contact with aqueous and fatty foodstuff with a pH > 4.5.If used for foodstuff with a pH < 4.5 it must be tested again using a simulant B (Acetic acid 3%).Note: This statement is provided for your guidance only and no warranties on your final products. Because the conditions of commercial use are not under our control, therefore migration tests on the finished package are needed for reconfirmation by the user.
Download Migration Test